UK Mailing Catalogue 2026 - Flipbook - Page 7
Watco Tack Coat
Watco Concrex Application Kits
High strength 100% solids epoxy resin adhesive primer
Large application kit
Small application kit
• ForusewithWatcoConcrex
•Makesshalloworintricaterepairseasier
•Overcoatin30-60minutes
•Curesat0°C
•Subzeroversionavailableforrepairsatminus20°C
• 4plasticbagsfor
transporting
•750mlWhiteSpirit
•10"SteelFloat
•4"Trowel
• 2" Paint Brush
• Wire Brush/Scraper
•5Cloths
•NitrileGloves
•Idealfor25kgofConcrex®
• 2plasticbagsfor
transporting
•250mlWhiteSpirit
•4"Trowel
• 2" Paint Brush
• Wire Brush/Scraper
•Clothanddisposablegloves
•Idealfor10kgofConcrex®
Coverage: Original:1m²or6m²Subzero:3m²
Curing time: Readytooverlaywithin30-60minutes
Original 1m2 - £29.00 (excl.VAT)
Original 6m2 - £82.95 (excl.VAT)
Sub Zero 3m2 - £36.85 (excl.VAT)
REPAIRS
For best results from our Concrex range use Watco Tack Coat
£18.70 (excl.VAT)
£32.50 (excl.VAT)
How to repair a damaged hole using Watco Concrex
1
2
Thoroughly clean the damaged area. In the
event of contamination with oils and grease,
we recommend using a suitable cleaner
such as Watco Concroff® (page 14).
4
For very shallow repairs or screeding,
Watco Tack Coat is essential to ensure
maximum adhesion to the substrate.
5
Wearing rubber gloves, mix the
components together by hand until you
get an evenly coloured light grey mixture.
Apply the mixed epoxy resin mortar
to the damaged area; making sure to
compact the mixture into the hole.
3
Empty the epoxy resin and sand mixture
into a Watco Concrex® Mixing Tub.
Then pour in the curing agent, ensuring
all bottles are completely empty.
6
Smooth over the repair with a trowel.
To avoid marks or scratches on the
surface, wipe the trowel with a damp
cloth. This will prevent the mortar
sticking to the trowel.
watco.co.uk | email sales@watco.co.uk | tel 01483 418 418 | Watco App
7
