IE Catalogue IE - Flipbook - Page 9
Watco Tack Coat
Watco Concrex Application Kits
High strength 100% solids epoxy resin adhesive primer
Large application kit
Small application kit
• For use with Watco Concrex
• Makes shallow or intricate repairs easier
• Overcoat in 30-60 minutes
• Cures at 0°C
• Sub zero version available for repairs at minus 20°C
• 4 plastic bags for
transporting
• 750ml White Spirit
• 10" Steel Float
• 4" Trowel
• 2" Paint Brush
•W
ire Brush/Scraper
• 5 Cloths
• Nitrile Gloves
• Ideal for 25kg of Concrex®
• 2 plastic bags for
transporting
• 250ml White Spirit
• 4" Trowel
• 2" Paint Brush
•W
ire Brush/Scraper
• Cloth and disposable gloves
• Ideal for 10kg of Concrex®
Coverage: Original: 1m² or 6m² Sub zero: 3m²
Curing time: Ready to overlay within 30-60 minutes
Original 1m2 - €31.95 (excl. VAT)
Original 6m2 - €91.20 (excl. VAT)
Sub Zero 3m2 - €40.60 (excl. VAT)
REPAIRS
For best results from our Concrex range use Watco Tack Coat
€20.45 (excl. VAT)
€38.15 (excl. VAT)
How to repair a damaged hole using Watco Concrex
1
2
Thoroughly clean the damaged area. In the
event of contamination with oils and grease,
we recommend using a suitable cleaner
such as Watco Concroff® (page 16).
4
For very shallow repairs or screeding,
Watco Tack Coat is essential to ensure
maximum adhesion to the substrate.
5
Wearing rubber gloves, mix the
components together by hand until you
get an evenly coloured light grey mixture.
Apply the mixed epoxy resin mortar
to the damaged area; making sure to
compact the mixture into the hole.
3
Empty the epoxy resin and sand mixture
into a Watco Concrex® Mixing Tub.
Then pour in the curing agent, ensuring
all bottles are completely empty.
6
Smooth over the repair with a trowel.
To avoid marks or scratches on the
surface, wipe the trowel with a damp
cloth. This will prevent the mortar
sticking to the trowel.
watco.ie | email sales@watco.ie | tel 01 6725 180
9
