IE Catalogue IE - Flipbook - Page 17
PREPARATION
Watco Powerfloat Primer & Rapid
Watco 4 Hour Epoxy Primer
Allows smooth concrete to be painted without mechanical
preparation
A fast drying primer for porous surfaces
• Unique formula prevents paint from peeling off from the floor
• Retain the smooth powerfloat finish
• Can be overcoated with most paints including Watco Epoxy
Gloss Coat
• Two part epoxy primer
Coverage: Approx. 30m² per 5L. One coat usually required
5L - Original - €128.30 (excl. VAT)
5L - Rapid - €141.85 (excl. VAT)
Clear
• Virtually solvent free
• Reduces suction on porous floors
• Binds weak and friable surfaces
• Prevents bubbles forming in epoxy top coats
Coverage: Approx. 20m² per 5L depending on the porosity of
the surface. One coat usually required
Curing Time: 2-4 hours at 10°C-15°C
5L - €106.65 (excl. VAT)
Grey
Watco Oil Block Primer
Watco Polyaspartic Primer
Allows contaminated concrete floors to be painted
For use with Watco specialist polyaspartic coatings
• Two part epoxy primer
• Seals in grease and oil prior to painting
• Ideal for garages and workshops
• Binds weak, porous surfaces
• Primes and seals porous, dusty floors prior to painting
• Can be used at minus 10°C to 25°C
• Ready to overcoat in 4 hours
• Carries CE mark EN1504-2
Coverage: Approx. 4m² per litre, one coat usually required
Curing time: 16 hours at 20°C
Coverage: Approx. 30m2 per 2.5L, one coat usually required
Curing time: Overcoat in 4 hours at 20°C
4L - €93.45 (excl. VAT)
2.5L - €127.35 (excl. VAT)
watco.co.uk
watco.ie
| email
| email
sales@watco.ie
sales@watco.co.uk
| tel 01 6725
| tel 01483
180 418 418 | Watco App
17
